|
|
INTERNAL
GAGE FRAMES |
| The basic internal
gage frames are available in two models. The G-600 with a capacity from
.190 inches to 5 inches basic and the G-1200 with a capacity from 6 inches
to 18 inches. The gage frames are extremely accurate, .000050 inch repeatability
is guaranteed. The system was designed to take the abuse of shop use although
it is precise enough for the requirements of the quality control or metrology
laboratory. Two extension kits are available. The G-600X increases the capacity
of the G-600 frame to 6 inches basic and the G-1200X increases the capacity
of the G-1200 frame to 24 inches basic. The gaging pressure of both internal
frames can be adjusted by the operator from maximum to negative pressure
thereby allowing very thin wall parts to be measured. |
 |
| |